模式识别与人工智能
2025年4月11日 星期五   首 页     期刊简介     编委会     投稿指南     伦理声明     联系我们                                                                English
模式识别与人工智能  2015, Vol. 28 Issue (4): 344-353    DOI: 10.16451/j.cnki.issn1003-6059.201504007
研究与应用 最新目录| 下期目录| 过刊浏览| 高级检索 |
物体轮廓形状超像素图割快速提取方法*
张荣国1,刘小君2,董磊3,李富萍1,刘焜2
1.太原科技大学 计算机科学与技术学院 太原 030024
2.合肥工业大学 机械与汽车工程学院 合肥 230009
3.中北大学 机械与动力工程学院 太原 030051
Superpixel Graph Cuts Rapid Algorithm for Extracting Object Contour Shapes
ZHANG Rong-Guo1, LIU Xiao-Jun2, DONG Lei3, LI Fu-Ping1, LIU Kun2
1.School of Computer Science and Technology, Taiyuan University of Science and Technology, Taiyuan 030024
2.School of Mechanical and Automotive Engineering, Hefei University of Technology, Hefei 230009
3.School of Mechanical and Power Engineering, North University of China, Taiyuan 030051

全文: PDF (1653 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 提出一种水平集框架下物体轮廓形状超像素图割快速提取方法.该方法首先均匀化放置种子点,通过对超像素化演化力的设定,生成具有区域相似特征的超像素,这些超像素对原图像的划分既能保持目标轮廓形状的几何特性,又可避免超像素间的互相重叠.然后构建超像素标号和Heaviside函数的关联关系,应用图割建立M-S能量函数的优化模型.最终利用超像素图割提取目标轮廓的几何形状.实验表明,超像素化的图像像素数目大幅度减少,转化后的优化模型符合图割对能量函数进行优化的要求,图割中最小割/最大流方法避开微分方程的求解,这些措施在保证轮廓形状提取效果的基础上提高提取效率.
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
Abstract:A rapid algorithm based on level set framework is presented for extracting object contour shapes. Firstly, initial seeds are placed in an image plane evenly. Through setting superpixel evolution forces, superpixels with similar region features are generated. The image segmented by these superpixels maintains geometric characteristics of object contour shapes and in the meantime prevents overlap between superpixel regions. Secondly, based on the relationship of superpixel labeling and Heaviside function, optimization model of the Mumford-Shah energy function is built by using graph cuts. Finally, geometric shapes of the object contour can be extracted by superpixel graph cuts. Experimental results show that the number of superpixels is reduced greatly, converted optimization model satisfies requirements of graph cuts against energy function optimization, and min-cut/max-flow method does not need to solve differential equations. Higher extracting effectiveness of object contour shapes and extracting efficiency are ensured by all these measures.
收稿日期: 2013-12-15     
ZTFLH: TP391  
基金资助:国家自然科学基金项目(No.51375132)、山西省自然科学基金项目(No.2013011017)、太原科技大学博士启动基金项目(No.20122025)资助
作者简介: 张荣国(通讯作者),男,1964年生,博士,教授,主要研究方向为图形图像处理、CAD/CG.E-mail:rg_zh@163.com.刘小君,女,1965年生,教授,博士生导师,主要研究方向为数字化设计、图像处理.董磊,男,1982年生,博士,讲师,主要研究方向为图像处理、模式识别.李富萍,女,1978年生,硕士,讲师,主要研究方向为图像处理、优化算法.刘焜,男,1963年生,教授,博士生导师,主要研究方向为现代设计方法学、数字化设计.
引用本文:   
张荣国,刘小君,董磊,李富萍,刘焜. 物体轮廓形状超像素图割快速提取方法*[J]. 模式识别与人工智能, 2015, 28(4): 344-353. ZHANG Rong-Guo, LIU Xiao-Jun, DONG Lei, LI Fu-Ping, LIU Kun. Superpixel Graph Cuts Rapid Algorithm for Extracting Object Contour Shapes. , 2015, 28(4): 344-353.
链接本文:  
http://manu46.magtech.com.cn/Jweb_prai/CN/10.16451/j.cnki.issn1003-6059.201504007      或     http://manu46.magtech.com.cn/Jweb_prai/CN/Y2015/V28/I4/344
版权所有 © 《模式识别与人工智能》编辑部
地址:安微省合肥市蜀山湖路350号 电话:0551-65591176 传真:0551-65591176 Email:bjb@iim.ac.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn